Security detecting: Prevent taking contraband, such as: knife, gun and so on. Factory: Prevent the loss of valued objects. Education area: Prevent taking cheat-tool,such as: telephone, electronic dictionary, and so on.
Electromechanical tyre killer is one of the most high-end vehicle access control products to prevent vehicle intrusion. Drive unit is placed into one end of the tyre killer and the product is installed above ground level. its “one- piece” design is aimed to achieve smooth transmission of motion as well as minimize the effect of external factors. To operate this…
ZKX6550 X-ray inspection system increases the operator’s ability to identify potential threats; the device is designed to scan briefcases, carry-on baggage, small cargo parcels. ZKX6550 uses reliable high quality dual energy X-ray generator. With the superb image algorithm, ZKX6550 could offer clear scanning image, which allows operators to identify potential threat items visually. ZKX6550 has innovative biometric identify function for…
ZK-RB1000 is a high quality road blocker which is used widely to protect security areas from vehicle intrusion. It is an ideal solution for entrance with high security requirements. Raising time of ZK-RB1000 is 3 seconds and the blocking height is 500 mm when it is raised. Even if the intrusion is from high tonnage vehicle in high speed, the…
BR1200 is ZKTeco’s pioneering standalone terminal with QR code reader, RFID and biometric authentications, it is mainly used as an embedded module into barriers. It supports multiple code formats including PDF417, QR code Model 1/2, Micro QR, Data Matrix and GS1-DataBar. BR1200s is mainly used as a slave device for BR1200 or other access control devices via RS232 connection,but also…
D2 Tabletop Terminal is specially designed for table or counter use (80-140cm). With fingerprint sensor placed on top of terminal, it enables all-directional fingerprint reading for the convenience of attendance. BioID high sensitivity fingerprint sensor provides faster and more accurate fingerprint verification. With built-in detachable battery lasting for up to 8 hours, and
iClock 680 is a biometric fingerprint reader for time & attendance and access control applications. It adopts a brand new firmware and provides an unprecedented user experiences with stunning GUI, rock-solid stability, fast matching speed and expandability. Users can easily manage data by networking iClock680 via RS232/485, TCP/IP, and USB client. Most importantly, all the
IN05 is a fingerprint identification time & attendance and access control terminal, which can connectwith third party electric lock, door sensor and exit button etc. Communicating via Wi-Fi, TCP/IP, 3G and USB host, it ensures a smooth connection and data transfer. It’s associated with ZK new fingerprint reader, the operation
MA300-BT, one of the innovative biometric fingerprint readers for access control applications. Offering unparalleled performances by adopting an advanced ZK fingerprint algorithm for reliability, precision and excellent matching speed. It is metallic casing and IP65 rated which enables it to be resistant from water, dust and other outside damages. MA300-BT offers the flexibility to be installed standalone or with any…
MA500 is an advanced biometric access control terminal that can be operated in standalone mode as well as network mode through TCP/IP or RS485 for software management. Equipping with a robust metal housing and durable backlit keypad, MA500 is vandal resistant and IP65 rated. It is suitable to be installed in high traffic and harsh environments. Apart from connecting with…
MB160 is an innovative product featured with ZK advanced fingerprint and face recognition technologies. It supports multiple verification methods including face, fingerprint, card, password, combinations between them and basic access control functions. User verification is performed in less than 1 second, which
P160 is a multibiometric identification time & attendance and access control terminal, which can connect with third party electric lock, door sensor, and exit button etc. With the latest palm/fingerprint identification algorithm and streamlined technology, it can hold 600 palm templates and up to 20,000 fingerprint templates without dividing into groups.
PFace202 multi-biometric time & attendance and access control terminal supports up to 600 palm templates, 1,200 face templates, 2,000 fingerprint templates and 10,000 cards (optional). With ZKTeco latest hardware platform and ZKFace, ZKFinger, ZKPalmVein algorithm, it offers brand new UI and user-friendly
The S1000 is a 4.3-inch touch screen Time Attendance Terminal with elegant design and professional surface treatment. This device is able to support Wi-Fi, GPRS, 3G, and features 20000 fingerprints capacity, especially applicable for some projects’ time attendance.
SC405 is a RFID Access Control Terminal which possesses a 2.0-inch color display with graphical UI, enabling simple and easy control. It has a built-in auxiliary input function which enhances the flexibility to be connected with wired detector or emergency switch. With multi-verification methods by combinations of PIN, password and card, high level of security and flexibility are guaranteed. Moreover,…
With innovative fingerprint verification algorithm, the SilkID fingerprint reader processes quick and precise identification of wet, dry and rough fingers. Infrared sensation technology enables accurate fingerprint sensing and auto-activation to save power.
3-in-1 Starter Facial Recognition Terminal with 5-inch Touch Display. Features: · Enhanced Visible Light Facial Recognition with Deep Learning built-in. · 3-in-1 verification with Fingerprint, RFID and Facial Recognition. · 5-inch touch LCD. · Dual-camera for real-time face detection. · 6,000 face template capacity. · Recognition distance: 0.3 - 3 m. · Compatible with external RS232, RS485 and Wiegand reader.…
The firmware of U260-C has been upgraded to the new firmware, it has new features like stunning GUI, more stability, faster matching speed and better expandability. Users can easily manage data by networking U260-C via RS232/485, TCP/IP, and USB host/client. Most importantly, all the functions can still operate in a networking state. It also supports
The firmware of U300-C has been upgraded to the New Firmware. It brings many new experiences, including the new stunning GUI, rock-solid stability, faster matching speed and better expandability. Users can easily manage data by networking U300-C via
UA760 is a 2.8 inches color screen biometric terminal for Time & Attendance, and Access Control (primary) applications. It adopts BioID fingerprint collector for excellent recognition and internal WiFi for convenient communication. Users can manage data via TCP/IP, WiFi, and USB host port for data up/download to avoid the risk of accidental deletion. Besides, optional WDMS can
UA860 is a 2.8 inches color screen biometric terminal for Time & Attendance, and Access Control (primary) applications. It adopts BioID fingerprint collector for excellent recognition and internal WiFi for convenient communication. Users can manage data via TCP/IP, WiFi, and USB host port for data up/download to avoid the risk of accidental deletion. Besides, optional WDMS can
uFace800 facial multi-biometric time & attendance and access control terminal supports up to 3,000 face templates, 4,000 fingerprint templates and 10,000 cards. With ZKTeco latest hardware platfrom and algorithm, it offers brand new UI and user-friendly operation interface to provide smooth user experience. With advanced face algorithm and multi-biometric verification technology, the terminal's security level of verification is significantly enhanced.
The firmware of X628-C has been upgraded to the New Firmware. It brings many new experiences, including the new stunning GUI, rock-solid stability, faster matching speed and better expandability. Users can easily manage data by networking X628-C via RS232/485, TCP/IP, and USB host. Most importantly, all the
MultiBio 800-H is a time attendance and access control terminal for face and fingerprint verification. Using ZK lastest ZKFACE 7.0 high-speed face recognition algorithm, it has extremely high verification speed and low error rate. With its high-resolution infrared night vision light and professional color duo camera, the terminal can carry out quick verification in any environment. What is more, it…
The BG1000 Series of barrier gates adopts ZKTeco's interactive LED chassis design, programmable control panel, high-efficiency Brushless DC motor, and SCM421 material gear transmission structure. It has the advantages of fast speed, stable quality, rich function expansion, and so on. It is a much comprehensive barrier gate.
D1 Tabletop Terminal is specially designed for table or counter use (80-140cm). With fingerprint sensor placed on top of terminal, it enables all-directional fingerprint reading for the convenience of attendance. BioID high sensitivity fingerprint sensor provides faster and more accurate fingerprint verification. With built-in detachable battery lasting for up to 8 hours, and
D1S is a time attendance device on a desk or counter. Fingerprints can be easily read at the top of the terminal, making the process of attendance record more convenient. With the high sensitivity sensor, BioID, speed and accuracy of verification will be enhanced, which helps deliver new user experiences. The stand-by time of the built-in removable battery is around…
D2S is a time attendance device on a desk or counter. Fingerprints can be easily read at the top of the terminal, making the process of attendance record more convenient. With the high sensitivity sensor, BioID, speed and accuracy of verification will be enhanced,which helps deliver new user experiences. The stand-by time of the built-in removable battery is around 12…
F16 is a fingerprint access control terminal with an integrated proximity reader (EM). It is IP65 rated which enables it to be resistant from water, dust and other outside damages. It can be installed easily on your network having both Ethernet and RS485 serial ports. Weigand-OUT port allows connection of reader to ZK or any 3rd party access control panels…
F21 is the first time attendance and access control terminal applying the most advanced SilkID technology. It not only possesses outstandingly high identification rate towards dry, wet and rough finger, but also provides the utmost security by its live finger detecting capability.as well as photo taking function which enables attendance photo and Photo ID(optional).
Indoor Facial Recognition Station with Slim and Exquisite design and 7-inch Display. Features: · Enhanced Visible Light Facial Recognition with Deep Learning built-in. · Maximum 10,000 face templates capacity. · 7-inch touch LCD. · Fingerprint and ID / MF module optional. · Dual-camera for real-time face detection. · Recognition distance: 0.3 - 3 m. · High performance processor boosted by…
FHT2300D: Full Height Turnstile FHT2311D: Full Height Turnstile with RFID Access Control System FHT2322D: Full Height Turnstile with Fingerprint and RFID Access Control System
FR1300 is an indoor slave reader with RS485 interface that works with master controllers from ZKTeco, for example, inBIO series biometric control panels. As a value-added slave reader, FR1300 provides the most secure and cost effective access control solution for small and medium enterprises.
FV18 is a multi-biometric reader capable of capturing and processing finger vein and fingerprint biometric data at the same time. The new hardware platform uses ZMM220 core-board with 1.2Ghz CPU. With optimization of both hardware platform and algorithm, FV18 is one of high recognition rate, high security & high speed terminal. The device offers flexibility of both standalone installation and…
FV350 is a multi-biometric reader capable of capturing and processing finger vein and fingerprint biometric data at the same time. Ergonomic, intuitive and highly secured, FV350 leads us to a new era of enhancing security with biometrics. Its infra-red rays illuminates the vein pattern which is then converted into a biometric template. Both the vein and fingerprint templates are then…
G1 is a revolutionary fingerprint time attendance device which incorporates the latest ZKTeco technology with completely new design. Enjoy excellent new features including Silk ID fingerprint sensor, new hardware platform, expanded fingerprint storage capacity, and more efficient and accurate verification. Infrared technology enables detection and provide higher energy efficiency.
G2 fingerprint identification terminal features ZKTeco’s innovative Silk ID fingerprint sensor. With 3D Neuron Fingerprint Verification Sensor-Activation and Anti-Interference technology, it precisely detects dry, wet, and rough fingerprints, and operates well under strong sunlight environment. With the latest core-board, the fingerprint capacity is enlarged to 20,000.
G4 is a multi-biometric identification terminal which features ZKTeco’s innovative Enhanced Visible Light Facial Recognition and SilkID fingerprint sensor technology. The device with latest technologies can perform recognition in a distance from 0.5m to 3m and will function automatically when face are detected so as to deliver higher recognition quality in terms of speed and accuracy than the previous near…
iClock700 is a 3.5-inch TFT screen Time & Attendance and Access Control Terminal. With the new user-friendly firmware, iClock700 is equipped with features like stunning GUI, more stability, faster matching speed and better expandability. iClock700 is compatible with various types of USB flash disks, ADMS and former SDK. Moreover, RS232/485, TCP/IP, and USB
KR702 reader is a full touch key waterproof reader,the Product is IP65 waterproof,and can be used for outdoor.The reader further enrich the diversity of ZK reader product. Meanwhile,the product is made of full acrylic appearance,full touch key,design high-end fashion, and suitable for the application of high-end places.
LFace10 is a fully upgraded version of the near-infrared facial recognition device KF10. LFace10 uses intelligent engineering Visible Light facial recognition algorithms and the latest computer vision technology.
MA300, one of the innovative biometric fingerprint readers for access control applications. Offering unparalleled performances by adopting an advanced ZK fingerprint algorithm for reliability, precision and excellent matching speed. It is metallic casing and IP65 rated which enables it to be resistant from water, dust and other outside damages. MA300 offers the flexibility to be installed standalone or with any…
MB360 is an innovative product featured with ZK advanced fingerprint and face recognition technologies. It supports multiple verification methods including face, fingerprint, card, password, combinations between them and basic access control functions. User verification is performed in less than 1 second, which streamlines the process of access. The communication between the MB360 and PC is by TCP / IP or…
MB460 is an innovative product featured with ZK advanced fingerprint and face recognition technologies. It supports multiple verification methods including face, fingerprint, card, password, combinations between them and basic access control functions. User verification is performed in less than 1 second, which streamlines the process of access. The communication between the MB460 and PC is by TCP / IP or…
As a state-of-the-art optical turnstile, OP1000 maintains a high security level as a half-height turnstile. It replaces the traditional physical barriers by utilizing active infrared beams to create an invisible electronic field between two pedestals. If there are any unauthorized entry attempts, audible alarm will be triggered to alert security staff.
OP1200 works as an expansion unit for OP1000. By adding a pair of infrared sensors on both sides, we can place an OP1200 in the middle of a set of OP1000 to form multi-lane to meet the varying requirements of the different customers.
PA10 is a time attendance and access control terminal with Palm & Fingerprint Hybrid Biometrics. The Palm verification includes Palm Print & Palm Vein, so it not only is touchless, but also supports antispoof function. The BioID sensor possesses outstandingly high identification rate towards dry, wet and rough fingers. TCP/IP, RS485, PoE (optional) and Wi-fi (optional) are also available which…
PB4000 series parking barrier adopts die-casting aluminum alloy motor and extraordinary structural design, it offers not only a long-life cycle, high reliablity and quality, but also reduces the difficulty of equipment maintenance. It is an ideal choice for vehicle entrance control management.
The S922 is specifically designed for off-site time management, such as construction sites, logistic industries, large farms, and the mining industry. Top handle with rubber coating enables users to carry easily.
Combined with mechanical, electronic, microprocessor control hard ware and RFID technology. Considering availability of different dimensions, SBT1000S swing barrier is a useful solution to provide access control for people with special needs/ disabled.
The ZKTeco SBTL2000 single lane swing barrier turnstile is an elegant cost-effective entrance control system designed for high-traffic volume. The SBTL2000 is a single lane swing barrier turnstile series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes SBTL2000 highly durable.
The ZKTeco SBTL2200 swing barrier turnstile for additional lane is an elegant cost-effective entrance control system designed for high-traffic volume. The SBTL2200 series should work together with SBTL2000 series to build multiple lanes.
The ZKTeco SBTL3000 single lane swing barrier turnstile is an elegant cost-effective entrance control system designed for high-traffic volume. SBTL3000 barriers are normally held in a locked position, thus denying access to the secured side. Upon SBTL3000’s reader (RFID and/or fingerprint) positively recognizing a user’s valid access card or fingerprint, its barriers swing automatically, thus allowing users passage to the…
The ZKTeco SBTL3200 swing barrier turnstile for additional lane is an elegant cost-effective entrance control system designed for high-traffic volume. The SBTL3200 series should work together with SBTL2000 series to build multiple lanes.
SC105 is a RFID Access Control Terminal which possesses a 2.0-inch color display with graphical UI, enabling simple and easy control. It has a built-in auxiliary input function which enhances the flexibility to be connected with wired detector or emergency switch. With multi-verification methods by combinations of PIN, password and card, high level of security and flexibility are guaranteed. Moreover,…
SC700 is a 125 KHz proximity access control terminal incorporated with 3’’ TFT LCD. The color display and touch screen operation offer a user-friendly and easy menu management. When connected with PC through Ethernet, SC700 is managed by ZKAccess 3.5 software. The software provides 2 applications, the access control and time attendance. It can also operate on standalone mode, and…
The SF300 is an IP based fingerprint terminal, which operate in both network mode and standalone mode. it can connect with ZKAccess3.5 software for access control and time attendance management. Wiegand output makes SF300 flexible to connect with ZK or any 3rd party controllers as a slave reader, Additionally, wiegand input allows two units of SF300 to configure with each…
SF400 is an IP based fingerprint terminal with both Network and Standalone operation modes. It is connectible with ZKAccess 3.5 software for access control and time attendance management. With Wiegand output, SF400 is flexible to connect with ZK or any 3rd party controllers as a slave reader. Wiegand input configures two SF400 units to utilize Master & Slave solution to…
ZKTeco's newly released SFace900 Semi-Outdoor Multi-Biometric Time Attendance & Access Control Terminal which supports 3,000 face templates, 4,000 fingerprint templates and 10,000 cards. It is the first terminal equipped with high performance camera, which enables outdoor installation under the eaves. It is also equipped with ZKTeco latest platform and algorithm, which provide clients with a brand new UI and user-friendly…
SilkBio-100TC is the first ever Time & Attendance and Access Control Terminal to be associated with SilkID fingerprint reader, face recognition and FRID card functions. With the new SilkID fingerprint reader, the operation remain stable under strong light source and high preciseness of verification of wet and rough fingers. With latest facial algorithm and the innovation features, Silkbio-100TC is bringing…
เป็นอุปกรณ์ควบคุมการเข้าถึงแบบสแตนด์อโลนทีตัวเรือนและแผงปุ่มกดสามารถกันนํากันและฝุ่นได้ตามมาตรฐาน IP65 ซึ่งสามารถรองรับการตรวจสอบผ่านรหัสผ่านและบัตร RFID โดยสามารถใช้งานเป็นเครืองอ่านทีเชือมต่อกับแผงควบคุมหรือใช้เป็นอุปกรณ์ควบคุมการเข้าถึงแบบสแตนด์อโลน
Starter Facial Recognition Terminal with 5-inch Touch Display. Features: · Enhanced Visible Light Facial Recognition with Deep Learning built-in. · Multiple verification with Fingerprint, RFID and Facial Recognition. · 5-inch touch LCD. · Dual-camera for real-time face detection. · 6,000 face templates capacity. · Recognition distance: 0.3 - 3 m. · Compatible with external RS232, RS485 and Wiegand reader. ·…
As one of the world’s smallest IP-based fingerprint terminals for access control and time attendance application, TF1600 is specially designed for working in rugged outdoor environment particularly in very low temperature condition. With built-in resistors, the device will be automatically heated up by itself if its MCU detects the temperature is below working requirement. TF1600 is adapted for operating temperature…
TF1700 is one of the world’s smallest Ethernet connection-based fingerprint terminals, used for access control and time attendance features, with IP65 waterproof housing. With its IP65 rated rugged waterproof and dustproof structure, TF1700 offers extra durability in harsh conditions such as outdoor environments. It is specially designed for standalone applications such as house, office, shop, garage, factory and others. The…
Our Pro series tripod turnstiles represent classic and safe way to protect your premises. They are widely used in various indoor environment applications. They fit perfectly as an economical option into the office buildings and other related applications.
TS1200 is a dual-lane tripod turnstile series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes TS1200 highly durable. TS1200 is also surprisingly compact and designed to operate in small workspaces. TS1200 tripod arms are normally held in a locked position, thus denying access to the secured side. Upon TS1200’s reader…
Our Pro series tripod turnstiles represent classic and safe way to protect your premises. They are used in various indoor environment applications. They fit perfectly as an economical option in the office buildings and other related applications.
TS2100 is a single-lane tripod turnstile series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes TS2100 highly durable. TS2100 is also surprisingly compact and designed to operate in small workspaces. TS2100 tripod arms are normally held in a locked position, thus denying access to the secured side. Upon TS2100’s reader…
TS2200 is a dual-lane tripod turnstile series designed for smooth and silent operation and draws very little power. It’s made of stainless steel which makes TS2200 highly durable. TS2200 is also surprisingly compact and designed to operate in small workspaces. TS2200 tripod arms are normally held in a locked position, thus denying access to the secured side. Upon TS2200’s reader…
TS5000A is an automatic tripod turnstile series designed for smooth and silent operation and consumes very little power. It is made of stainless steel that offers high durability. TS5000A is also surprisingly compact and designed to operate in small workspace. TS5000A tripod arms are normally held in a locked position, thus denying access to the secured side. Upon the reader…
UA300 adopts the brand new firmware and provides an unprecedented user experience. It brings innumerable surprises, including the stunning GUI, rock-solid stability, fast matching speed and expandability. Users can easily manage data by networking UA400 via RS232/485, TCP/IP, USB Host or USB Client. Most importantly, all
UA400 adopts the brand new firmware and provides an unprecedented user experience. It brings innumerable surprises, including the stunning GUI, rock-solid stability, fast matching speed and expandability. Users can easily manage data by networking UA400 via RS232/485, TCP/IP, USB Host or USB Client. Most importantly, all the functions can still operate in a networking state. UA400 is compatibility with various…
ZKTeco has released the uFace202 Multi-Biometric T&A and Access Control Terminal which supports 3,000 face templates, 4,000 fingerprint templates and 10,000 cards. It is equipped with ZKTeco latest hardware platform and algorithm, which provide clients with a brand new UI and user-friendly operating interface, bringing them a smooth using experience. With the advanced face algorithm and multi-biometric verification technology, the…
ZKTeco has released the uFace302 Multi-Biometric T&A and Access Control Terminal which supports 3,000 face templates, 4,000 fingerprint templates and 10,000 cards. It is equipped with ZKTeco latest hardware platform and algorithm, which provide clients with a brand new UI and user-friendly operating interface, bringing them a smooth using experience. With the advanced face algorithm and multi-biometric verification technology, the…
uFace 402 Facial multi-biometric time & attendance and access control terminal supports up to 3,000 face templates, 4,000 fingerprint templates and 10,000 cards. With ZKTeco latest hardware platfrom and algorithm, it offers brand new UI and user-friendly operation interface to provide smooth user experience.
ZKTeco is now presenting the uFace800 Plus Multi-Biometric T&A and A&C Terminal, which supports 3,000 palm templates, 3,000 face templates, 4,000 fingerprint templates, and 10,000 cards (optional). It is equipped with ZKTeco's latest hardware platform and algorithm like 3-in-1 contactless palm recognition (Palm Shape, Palm Print and Palm Vein), so the terminal can perform bio-authentication with the palm vein, palm…
WL20 is Fingerprint Time & Attendance Terminal with Wi-Fi module. With Wi-Fi function, User needn’t wire Ethernet cable, it supports hotspot mode and allow mobile APPs connection and check in/out and download record directly. It’s associated with ZK new fingerprint reader, the operation remains stable under strong light source and high preciseness of verification of wet
WL30 is Fingerprint Time & Attendance Terminal with Wi-Fi module. With Wi-Fi function, User needn’t wire Ethernet cable, it supports hotspot mode and allow mobile APPs connection and check in/out and download record directly. It’s associated with ZK new fingerprint reader, the operation remains stable under strong light source and high preciseness of verification of wet
X8-BT is the most innovative biometric fingerprint reader for access control applications, offering unparalleled performance using an advanced algorithm with excellent reliability, precision and matching speed. It can operate on standalone mode with the interface for third-party electric lock, alarm, door sensor, exit button and doorbell. Its touch keypad operation is easy and convenient, providing user a comfortable use experience.It…
X8s is the most innovative biometric fingerprint reader for access control applications, offering unparalleled performance using an advanced algorithm with excellent reliability, precision and matching speed. It can operate on standalone mode with the interface for third-party electric lock, alarm, door sensor, exit button and doorbell. Its touch keypad operation is easy and convenient, such as enrolling user, deleting user…
SilkBio-101TC is Time & Attendance and Access Control Terminal to be associated with SilkID fingerprint reader, face recognition and RFID card functions. With the new SilkID fingerprint reader, the operation remains stable under strong light source and high preciseness of verification of wet and rough fingers. With latest facial algorithm and the innovation features, SilkBio-101TC is bringing you the whole…
BOL1168-F is a high-quality fixed bollard which used widely to prevent vehicles from entering security areas. It is commonly found in schools, shopping malls, hotels, or housing estates where traffic guidance is needed to protect pedestrians and property. This product provides ideal access control in the areas mentioned and promotes the level of security.
BOL1168-R is a high-quality removable bollard which used widely to prevent vehicles from entering security areas. It is an ideal low-cost solution when the depth is not sufficient to install an automatic bollard. The bollard can simply be unlocked and removed by the key provided. This feature allows people to achieve flexible entrance control when access is only occasionally opened.…
BOL1219-A is a high-quality automatic bollard which is used widely to protect security areas from vehicle intrusion. It is an ideal solution for entrance with high security requirements. Raising time of BOL1219-A is 3 seconds. Even if the intrusion is from high tonnage vehicle in high speed, the bollard will stop the vehicle easily because it is so solid that…
ZK-D300, The high sensitivity hand-held metal detector for top-class security applications. Combines high reliability and ergonomics with advanced detection and operator signaling features.
Plock 1 is ZKTeco first generation parking lock, combined with years of practical experience and industry accumulation of technology, it can achieve the private parking management. Compared to the traditional manual parking lock, Plock 1 provides smart, convenient and perfect user-experience. It can be widely used in residential, corporate buildings, industrial parks, hotels, airports and other parking management.
Plock 2 is ZKTeco’s second generation of parking locks. Plock 2 keeps all original features of Plock 1 and is equipped with new auto-sensing function. User can easily manage his/her parking space by placing a sensor in a cigarette lighter receptacle. Compared with traditional parking locks, Plock 2 does not need any manual operation, which makes parking experiences more ideal.…
ZK-D180 is the ZKTeco self-developed compact size hand held metal detector featured with a detection indicator right in the middle of its main body detecting the sizes of detected objects and visualizing in different color (Green to Red), a perfect tool for speeding up security process. The controllable sound and vibration effect is another highlight, security guard can identify the…
ZKX10080 X-ray inspection system increases the operator’s ability to identify potential threats; the device is designed to scan the objects up to a size of 100 × 80cm. ZKX10080 uses reliable high quality dual energy X-ray generator. With the superb image algorithm, ZKX10080 could offer clear scanning image, which allows operators to identify potential threat items visually. Also, ZKX10080 equipped…
ZKX5030A X-ray inspection system increases the operator’s ability to identify potential threats; the device is designed to scan briefcases, carry on baggage, small cargo parcels. ZKX5030A uses reliable high quality single energy X-ray generator. With the superb image algorithm, ZKX5030A could offer clear scanning image, which allows operators to identify potential threat items visually. With ergonomic modern design, ZKX5030A could…
ZKX5030C X-ray inspection system increases the operator’s ability to identify potential threats; the device is designed to scan briefcases, carry-on baggage, small cargo parcels. ZKX5030C uses reliable high quality dual energy X-ray generator. With the superb image algorithm, ZKX5030C could offer clear scanning image, which allows operators to identify potential threat items visually. ZKX5030C has innovative biometric identify function for…
ZKX6550A is a single energy X-ray screening system that provides a highly economical visual inspection solution for carry-on luggage. ZKX6550A uses reliable high quality X-ray generator. With the superb image algorithm, ZKX6550A could offer clear scanning image, which allows operators to identify potential threat items visually. ZKX6550A has innovative biometric identify function for operators, improving the security of system and…
ZKX6550D is a dual view x-ray security inspection equipment. ZKX6550D could display horizontal and vertical images by two independent generators, and could detect organic, inorganic or mixtures quickly according to the effective atomic number of objects those are been detected. ZKX6550D could identify overlapping items and contraband easily and precisely. ZKX6550D X-ray inspection system increases the operator’s ability to identify…
ZKX6550V uses reliable high quality dual energy X-ray generator. With the superb image algorithm, ZKX6550V could offer clear scanning image, which allows operators to identify potential threat items visually. ZKX6550V has innovative biometric identify function for operators, improving the security of system and preventing operator from forgetting password. Advanced video surveillance technology can record each security process, and stored on…
Features: · 33 detection zones · 7"LCD HD display interface · Remote control · Simple installation and use · In and out count · Excellent anti-interference ability and stability · Each zone has 300 adjustable sensitivity level · Supports various language interface customization · Higher accuracy and verifcation speed · Pass count and Alarm count memory function
Deadbolt Digital Lock with Bluetooth Enabled Features: · Reversible Design: Fit For All Door Open Direction · Manual Lock & Unlock Inside Room · Private Mode
Deadbolt Digital Lock with Bluetooth Enabled. Features: · Reversible Design: Fit For All Door Open Direction · Manual Lock & Unlock Inside Room · Private Mode · Voice Guide : English / Spanish / Portuguese · Volume Adjustment & Silent Mode
Fingerprint lock with password and card options European standard mortise with 5 latches Fingerprint/Password/Card/Key ID/Mifare card reader is optional
Split Design Hotel Door Lock with EU standard mortise Features: · Split design · Create record card for unlock logs · Enhanced security by double lock mode · European standard mortise · With advanced 13.56 Mhz Mifare card technology · Professional and free hotel lock management software
ML10 is a smart lock with embedded fingerprint recognition technology. It is DIY design,which can replace knob lock easily and quickly. You even can do it by yourself.
ML10B/ML10DB series is a smart lock with embedded fingerprint recognition technology. It supports blue-tooth connection,door unlocking and user management by mobile phone.
Smart Fingerprint Padlock Features : · Easy to operate · Easy to carry, small and lightweight · USB rechargeable & extreme long battery life · Widely use for locker, door and bag · Low battery warning
PL10B/PL10DB series is a smart lock with embedded fingerprint recognition technology. It supports blue-tooth connection,door unlocking and user management by mobile phone.
Smart Phone, Smart Lock. Your smart phone is now your key. Voice volume is adjustable. Enhanced security by random password for code access. European standard mortise - the door locks by itself once close.
TL200 is a fingerprint lock with voice-guided feature, which makes operation very easy and quick. It uses the mechanical anti-theft mortise with one latch and two security deadbolts, that allows users to lock the door from both indoor and outdoor. Meanwhile, TL200 has various approaches to open the door, such as with fingerprint, password, card and key. It has one…
ZK-E8800 Portable Threats Trace Detector is based on Ion Mobility Spectrometry (IMS) technology, which enables it to quickly and accurately trace explosives and narcotics at the same time then identify amount and types of suspicious substanc- es. In addition, the detector has the function of X- & gamma radiation dose rate detection which makes it a 3-in-1 threats detector. The…
LPRS1000 adopts a set of independent research and development of top-class license plate recognition algorithm, and combining with years of experience in industry application. No need to stop, and no need to swipe card. Quick access to the parking lot of the automatic license plate recognition mode, provides users with more intelligent, more convenient, more perfect experience.
LPRC100 is the first generation of license plate recognition camera of ZKTeco. It adopts the self-developed license plate recognition algorithm. Based on years of industry experience in LPR camera hardware platform and professional parking management software, LPRC100 is developed to identify the moving license plate accurately in complex environment, take photographs of plates, and send the information back to the…