| ioLogik E1263H Specifications | |
| • Inputs and Outputs | |
| Configurable DIOs (by software) | 24 channels |
| Analog Inputs | 10 channels |
| RTDs | 3 channels |
| Isolation | 3k VDC 2k Vrms |
| • Digital Input | |
| Sensor Type | Wet Contact (NPN PNP), Dry Contact |
| I/O Mode | DI Event Counter (channels 0 to 7) |
| Dry Contact | • On: short to GND • Off: open |
| Wet Contact (DI to GND) | • On: 0 to 3 VDC • Off: 10 to 30 VDC |
| Common Type | 12 points per COM |
| Counter Frequency | 250 Hz |
| Digital Filtering Time Interval | Software configurable |
| • Digital Output | |
| Type | Sink |
| I/O Mode | DO Pulse Output (channels 0 to 7) |
| Pulse Output Frequency | 500 Hz |
| Over-Voltage Protection | 45 VDC |
| Over-Current Protection | 2.6 A (4 channels @ 650 mA) |
| Over-Temperature Shutdown | 175°C (typical), 150°C (min.) |
| Current Rating | 200 mA per channel |
| • Analog Input | |
| Type | Differential input |
| Resolution | 16 bits |
| I/O Mode | Voltage / Current (software selectable) |
| Input Range | 0 to 10 V, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA (burnout detection) |
| Accuracy | • ±0.5% FSR @ 25°C • ±1.0% FSR @ -40 and 75° |
| Sampling Rate (all channels) | • All channels: 12 samples/sec • Per channel: 0.9 samples/sec |
| Input Impedance | 10 mega-ohms (min.) |
| Built-in Resistor for Current Input | 120 ohms |
| • RTDs | |
| Sensor Type | • PT100 (-200 to 850°C) |
| Input connection | 2- 3-wire |
| Sampling Rate | • All channels: 12 samples/sec • Per channel: 0.9 samples/sec |
| Resolution | 0.5°C |
| Accuracy | • ±0.5% FSR @ 25°C • ±1.0% FSR @ -40 and 75°C |
| Input Impedance | 625 kilo-ohms |
| • Power Requirements | |
| Input Voltage | 12 to 48 VDC |
| Input Current | 343 mA @ 24 VDC |
| • Physical Characteristics | |
| Dimensions | 204 x 113 x 36.3 mm ( 8.03 x 4.45 x 1.43 in) |
| Weight | 945 g (2.08 lb) |
| • MTBF (mean time between failures) | |
| Time | 180,390 hrs |
| Standard | Telcordia SR332 |
| Common Specifications | |
| • LAN | |
| Ethernet | 2 switched 10/100 Mbps RJ45 ports |
| Protection | 1.5 kV magnetic isolation |
| Protocols | Modbus/TCP (slave), TCP/IP, UDP, DHCP, BOOTP, HTTP |
| • Serial | |
| Interface | 1 RS-232/422/485 (software selectable) DB9 male port |
| Parity | None |
| Data Bits | 8 |
| Stop Bits | 1 |
| Flow Control | None |
| Baudrate | 300 to 115200 bps |
| Protocols | Modbus RTU (slave) |
| • Physical Characteristics | |
| Wiring | I/O cable max. 14 AWG |
| Mounting | DIN rail (standard), wall (with optional kit) |
| • Environmental Limits | |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Shock | IEC 60068-2-27 |
| Vibration | IEC 60068-2-6 |
| Altitude | Up to 2000 m Note: Please contact Moxa if you require products guaranteed to function properly at higher altitudes. |
| • Standards and Certifications | |
| Safety | UL 508 |
| EMC | EN 55032/24, EN 61000-6-2/6-4 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 2 kV IEC 61000-4-6 CS: 3 V IEC 61000-4-8 |
| Maritime | IEC 60945 |
| Green Product | RoHS, CRoHS, WEEE Note: Please check Moxa’s website for the most up-to-date certification status. |
| • Warranty | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
MOXA, Remote I/O
ioLogik E1263H-T
Features and Benefits
-
User-definable Modbus/TCP Slave addressing
-
2-port Ethernet switch for daisy-chain topologies
-
Active communications with MX-AOPC UA Server
-
Easy mass deployment and configuration with ioSearch utility
-
Friendly configuration via web browser
-
Simplify I/O management with MXIO library on either Windows Linux platform
-
IEC 60945 approval for harsh offshore environments
-
Wide operating temperature range: -40 to 75°C (-40 to 167°F)
